AGFA 5410/050 Скачать руководство пользователя страница 44

Страница: 44 / 75

being used and if the status of the DR Detector is ready for

exposure.

CAUTION:

The unit is equipped with a safety switch in the drive handle. If

the drive handle is released the unit will stop. In case of

unintended movement, do not try to correct the units'

movement via the drive handle but release the drive handle

immediately to stop the unit. If you experience unintended

movement, the unit has to be taken out of operation. Please

notify your Agfa service contact at once.

CAUTION:

Excessive ambient temperature may impact performance of DR

Detectors and cause permanent damage to the equipment. Refer

to the related user manual for environmental conditions for the

DR detector. If ambient temperature and humidity is outside the

specified range, do not operate the system or use air

conditioning. Warranty will be void if it is obvious that

operating conditions are not met.

CAUTION:

Damaged grid. Reduced image quality. Please handle the grids

with special care.

For directions concerning X-ray radiation safety, electrical safety and

electromagnetic safety, refer to the DX-D 100 Mobile X-Ray Unit User Manual,

document 0188.

Topics:

•

Cleaning the system

•

Disinfection of the system

•

Emergency stop button

| DX-D 100 | Introduction

0187K EN 20191024 1609

Содержание 5410/050












































































Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды

AGFA 5410/050, Руководство пользователя

Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды