background image

28

2386G EN 20120110

Introduction

CR 30-X/CR 30-X

M

Environmental Protection

WEEE end user information

On August 13, 2005, the European Directive on Waste Electrical and 
Electronic Equipment (WEEE) 2002/96/EC, amended by Directive 2003/
108/EC came into force.

The directive on Waste Electrical and Electronic Equipment (WEEE) 
aims to prevent the generation of electric and electronic waste and to 
promote the reuse, recycling and other forms of recovery. It therefore 

requires the collection of WEEE, recovery and reuse or recycling. This 

directive has to be implemented into national law by the individual European 
countries by August 13, 2005.

Due to the implementation into national law, specific requirements can be 
different within the European Member States.

This symbol on the products, and/or accompanying documents means that 
used electrical and electronic products should not be treated as, or mixed with 

general household waste.

For more detailed information about take-back and recycling of this product 

please  contact  your  local  Agfa  service  organization  and/or  Agfa  dealer.  By 
ensuring this product is disposed of correctly, you will help prevent potential 
negative consequences for the environment and human health, which could 

otherwise be caused by inappropriate waste handling of this product. The 
recycling of materials will help to conserve natural resources.

Battery Notice

This wheeled bin symbol on the products, and/or accompanying 
documents means that the used batteries should not be treated as, or 
mixed with general household waste.

This wheeled bin symbol on batteries or its packaging may be used in 

combination with a chemical symbol. In cases where a chemical symbol is 
available it indicates the presence of respective chemical substances. If your 

equipment or replaced spare parts contain batteries or accumulators please 
dispose of them separately according to local regulations.

For battery replacements please contact your local sales organization.

Hg

Содержание 5175/200



































































Отзывы: