AGFA 5175/200 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 66

AGFA 5175/200 Скачать руководство пользователя страница 37

37

2386G EN 20120110

Getting Started with the CR 30-X/CR 30-Xm

CR 30-X/CR 30-X

M

The Erase Button

Press the erase button

to start the erasing cycle of an image plate.

After pressing the erase button, the upper part of the status indicator is
continuously lighting up in blue and the digitizer starts erasing the image
plate of the cassette inserted next. If no cassette with image plate has been
inserted after 60 seconds, the system automatically returns to standby mode.

For more information, refer to

‘Re-erasing an Image Plate’

on page

Status Indicator

The indicator informs the user by light signals about the status of the digitizer.
It is positioned at the front of the digitizer, so that it is visible from a distance.

The indicator is divided in two parts. The upper part is
used to inform the operator about the image plate
erasing cycle progress and is only then lit. The lower part
is used for all other operational indications.

Color

Constant/

Flashing

Status

Action

Blue

Constant

Activating the erasing
cycle

Green

Constant

• Standby mode

(Ready)

• Cassette is ready for

removal

• Proceed.

• Remove cassette.

Flashing

Busy with scanning,
erasing and return of the
IP into cassette

Wait.

Red

Constant

Service mode

Check workstation for further
information and detailed
instructions.

Flashing

• Warm up / Self-test
• Processing Software

down

• Error

blue

green or

red

«
...
35
36
37
38
39
...
»

Содержание 5175/200



































































Отзывы:

Нет отзывов