AGCO Glencoe SOIL FINISHER SF4600, Руководство оператора

Страница: 7 / 36

SAFETY PRECAUTIONS
SAFETY SYMBOL
The symbol above calls your attention to instructions
concerning your personal safety. The symbol is
found throughout the manual as well as on the
machine to point out specific hazards and the ways
to avoid them. Always follow the instructions to
minimize the risk of personal injury or death.
Think before you act !
• Avoid injury or fatal accidents. Read these
safety precautions completely and carefully!
Utilize these instructions when operating your
machine.
• The operator should be a responsible adult
familiar with farm machinery and trained in this
machine’s operations. Do not allow persons to
operate this machine until they have read this
manual and have developed a thorough
understanding of the safety precautions and of
how the machine works.
• To prevent injury or death, use a tractor
equipped with a roll-over protection structure
(ROPS) and seat belt. Do not paint over,
remove or deface any safety decals on your
equipment. Observe all safety decals and follow
the instructions on them.
• Remember! Your best insurance is a careful and
responsible operator. If there is any portion of
this manual or of the machine’s operation you
do not understand, contact your local
authorized Glencoe® dealer, or AGCO®
Corporation.
• Always shut off tractor, shift to “Park” position
(or shift to neutral), set brakes and cycle
hydraulic levers before dismounting tractor or
working around the machine.
• Remove tractor start key when tractor and
implement will be unattended.
• Properly tighten all mounting hardware. See
bolt torque chart.
• Periodically inspect all moving parts for wear
and replace with only authorized service parts if
any excessive wear is present. If safety decals
are missing, illegible, or damaged, they should
be replaced.
• Keep safety decals free of dirt and grime.
• Never allow anyone to ride on this equipment.
• Clear the area of bystanders before starting
operation.
• Do not clean, adjust or service when the
machine is in motion.
• Never leave unattended equipment in the
unlocked raised position. Lower the unit to the
ground or use transport locks.
• Do not leave tractor or implement unattended
with tractor engine running.
• All hydraulically or mechanically elevated
components must be blocked to prevent
accidental lowering or must be lowered to the
ground when adjustments or repairs are made.
• Avoid sharp turns using brakes. Drive slowly
over rough ground, side hills and around
curves to avoid tipping.
• Wear personal protective equipment (PPE)
such as, but not limited to, protection for eyes,
lungs, ears, head, hands and feet when
operating, servicing or repairing equipment. Do
not wear loose clothing or jewelry as it may
entangle or catch on moving parts.
• Never use your hands to locate a hydraulic
leak. Use a piece of wood or cardboard.
Hydraulic fluid escaping under pressure can
penetrate the skin causing serious injury.
3
Hydraulic Leak Detection