AGCO Glencoe SOIL FINISHER SF4600, Руководство оператора

Страница: 11 / 36

OPERATION
Warning! Do not unhitch from tractor while in the raised position. Unhitching the machine in a raised
position could cause the front of the machine and the hitch to spring upward possibly
injuring the operator and bystanders. Always store the machine in the lowered position
(shovels resting on the ground).
TRACTOR PREPARATION
Prior to attaching the implement the tractor should
be prepared as follows:
• Tractor tires should be inflated and ballast
added according to the tractor operator’s
manual.
• The tractor drawbar should be locked in the
center position for road transport. For field
operation the drawbar must be free to swing.
• Check the tractor hydraulic reservoir and add
oil as required. Additional oil may be required
after charging the hydraulic system. (Refer to
the “Charging the Hydraulic System” section of
this manual.)
IMPLEMENT PREPARATION
Before taking your implement to the field the
following procedures should be done.
• Check all hardware for proper tightness. When
the machine is new the hardware should be
checked every few hours of operation.
• Replace any ground tools that are severely
worn or damaged.
• Check tires for proper inflation. Check the
wheel lug bolts.
• Lubricate the machine.
• Check hoses, fittings and cylinders for any
fraying of hoses or leakage. Replace as
required.
• Never use your hands to locate a hydraulic
leak. Use a piece of wood or cardboard.
Hydraulic fluid escaping under pressure can
penetrate the skin causing serious injury.
• Openings in the skin and minor cuts are
susceptible to infection from hydraulic fluid. If
injured by escaping fluid, see a doctor at once.
Without immediate medical treatment, serious
infection can occur.
7
Hydraulic Leak Detection