AGCO Glencoe SOIL FINISHER SF4600, Руководство оператора

Страница: 13 / 36

OPERATION
GENERAL OPERATION INFORMATION
• Before raising or lowering the machine or
operating the wing fold mechanism be certain
the hydraulic system is charged with hydraulic
oil. (Refer to the “Charging the Hydraulic
System” section of this manual.
• Check the hydraulic oil level of the tractor. Add
oil as required.
• When operating the implement in the field,
always allow the tractor drawbar to swing free.
• Recommended operating speed is 5 - 8 mph.
• Horsepower requirements will vary depending
on depth of operation, soil type and condition.
• Speed should be reduced at the ends of the
field and when turning. Do not make high
speed turns at any time, either in the field or in
transport.
• To prevent shank damage, raise the machine
completely out of the ground when backing up
or turning during operation.
• Raising the machine completely out of the
ground (cylinders completely extended) helps
keep the hydraulic system in phase. This also
applies to the hydraulic disc gangs. Fully
extend disc gang cylinders at regular intervals
to keep them in phase. Refer to the “Charging
the Hydraulic System” section of this manual.
9