22
AGC Stopray SMART
–
Processing Guide
–
Version 4.1
–
May 2020
III CONFORMITY and GUARANTEE
1
Conformity
The Stopray SMART products comply with the standard EN 1096-1, category C.
The Stopray SMART coatings (heat treated or not) must be assembled in double glazing with the coating
in inside the cavity. Stopray SMART 51/33 can be used laminated with coatings facing PVB, however
only in the recommended position #2.
Information regarding inspection conditions and quality criteria are available in that standard.
2
Warranty
Contact AGC Technical Advisory Service for further information (
).
3
Local Standards
Where customers process these coatings (heat strengthening, toughening, lamination, assembly in
IGUs), they are responsible for local standards processed products (required tests, marking the glass,
factory production control, etc).
4
Disclaimer
It is the responsibility of the processor to inspect the processed coated glass adequately before and
after each step of fabrication and prior to installation. Failure to apply all professional standards,
customary instructions and processing instructions written in this processing guide and related links will
automatically void any warranty regarding coated glass of AGC. We advise the processor to undertake
some preliminary trials with the typical glass compositions for the project prior to any further commitment
with his customer. The processor is solely responsible for the quality of the final product.
Regarding preliminary trials advices can be obtained at AGC TAS (
).
IV GLAZING INSTRUCTIONS
The AGC glazing instructions are available at www.yourglass.com.
V CLEANING ON FACADE
The cleaning instructions for glazing installed on facades are available at www.yourglass.com.
