21
AGC Stopray SMART
–
Processing Guide
–
Version 4.1
–
May 2020
13
Storage of cut sizes / IGU
13.1
During processing in the same factory
After each processing step, when the glass is stored on racks, no particular spacer is needed if the
original interlayer powder is still present. If for any reason there is not enough interlayer powder left on
the glass, and particularly after the washing, we recommend that you place cork spacers between the
sheets . The same recommendations apply for packs with several glass dimensions.
The storage must be conformed to the recommendations of Section I.2.
13.2
To send cut size to another factory
If the Stopray SMART coatings have to be delivered from the processing factory to another factory,
the following recommendations for packaging must be adhered to:
A 1 mm-polyethylene foam spacer should be placed between each sheet .
Care must be taken to ensure that the pack is properly attached to the rack so that the sheets do not rub
together.
The pack of glass should be packaged in watertight plastic. Sachets filled with desiccating agent should
be placed inside the packaging.
13.3
On site
When the glazing is delivered on site to be installed on the facade, it must be stored in a dry, sheltered
and ventilated space. It must never be laid flat, nor be stored in the sun or near a heat source.
