Page 27
AGA Ellesmere Electric Standard Stove
Installation & User Manual
STOVE RESET SEQUENCE
1) Unplug the Stove from the wall socket
2) Switch the unit OFF on the rocker switch on the side of the stove
3) Turn the on/off rocker switch to ON
4) Using the remote only turn the display ON
5) Does it work?
6) Turn the heater on to the low setting
7) Does it work?
8) Turn the heater on to the high setting
9) Does it work?
CARE AND MAINTENANCE
1. Switch off and unplug from the power supply before cleaning.
2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface
of the products.
CAUTION: Unplug from the mains electrical supply and allow the product to completely cool
before handling or cleaning it.
3. Do not allow water or other liquids to run into the interior of the product, as this could create a
fire and/or electrical hazard.
4. We also recommend the periodic cleaning of this appliance by lightly running a vacuum cleaner
nozzle over the guards to remove any dust or dirt that may have accumulated inside or on the
unit.
5. VERY IMPORTANT - REGULARLY CLEAN THE COOL AIR INLET VENT AT
THE BOTTOM REAR OF THE STOVE AND THE HOT AIR OUTPUT VENT AT
THE BOTTOM FRONT OF THE STOVE OF ANY FOREIGN MATTERS SUCH
AS PET HAIRS, CARPET FLUFF, DUST, DEBRIS OR FIBRES
CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the plastic components.
