Page 22
AGA Ellesmere Electric Standard Stove
Installation & User Manual
MANUALLY OPERATING THE STOVE - INSTRUCTIONS
This touch pad is located on the right hand side of the stove at the top
1
TURNING THE HEATER ON/OFF ONLY
– LOW HEAT / HIGH HEAT
Press the
button/key on the touch pad. When pressed for the first time
，
the heater will work at the
High Heat Setting of 1900W, the indicator panel
lights up RED.
Press for the second time, the heater reduces to the Low Heat setting of 950W
，
the indicator panel
lights up BLUE. Press for the third time, the heating element turns off, the indicator panel light
extinguishes.
Note: After the heating elements are turned on manually, the heating elements will work but are not
controlled by the temperature thermostat sensor which is located inside the stove.
2
FLAME EFFECT ONLY
– BLUE, RED & YELLOW LED LIGHT OPTIONS
Press key
button/key on the touch pad. When pressed for the first time, the bottom base LED
lights and rear flame will light up on their highest brightness setting, this automatically brings on all 3 x
light colours Blue, Red & Yellow. Press for the second time, the base LED lights and rear flame are set to
their medium brightness. Press for the third time, the base LED lights and rear flame will be in its lowest
brightness setting. Press for the fourth time, the base LED lights and rear flame goes out.
RED LIGHTS
- for Real Wood / Coal Flame effect
YELLOW LIGHTS
- for Real Wood Flame effect
BLUE LIGHTS
- usually used for the ICE mood effect
When used in remote control mode you can mix all of the 3 lights and brightness’s together or just have
one and/or two light colour(s) on independently to set the mood you require in the room
