Page 24
AGA Ellesmere Electric Standard Stove
Installation & User Manual
3
TURNING ON THE INDIVIDUAL LIGHTS
– BASE & REAR FLAME
The 3 x colours can be adjusted in brightness from Low, Medium & High then OFF
independently as follows by just single pressing the icon button on the remote below:
Press (1) to adjust the red flame. The buzzer beeps once when the key is pressed;
Press (2) to adjust the yellow flame. The buzzer beeps once when the key is pressed;
Press (3) to adjust the blue flame. The buzzer beeps once when the key is pressed;
You can mix all of the 3 lights and brightness’s you require together or just have one and/or two light
colour(s) on independently to set the mood you require in the room by just pressing the 3 coloured
flame buttons on the remote control
4
TURNING ON/OFF & ADJUSTING THE COLOURS OF THE DOWN LIGHTS
Press the
button to turn on, turn off and adjust the top light colors. The buzzer beeps
once when the key is pressed; There are 16 shades of colour varying from red, green, blue,
violet, purple & yellow. If you want you can just have the down lights on without the flame
effect
5.
TURNING ON THE HEATER ONLY
– HIGH & LOW HEAT
Press the Heating key . When pressed for the first time, the heating elements works at
the High Heat setting of 1900W, the LCD screen displays
, the indicator
on the stove
lights red. Press a second time, the heating elements reduces down to the Low Heat Setting of
950W, the LCD screen displays
, the indicator
on the stove lights blue. Press a third
time and the heating elements turns off, the LCD screen does not display the function icon, the
indicator
on the stove goes off. The buzzer beeps once when the key is pressed;
Note: in case the heating elements are turned on by remote control, whether the heating
elements work or not depends on the temperature setting and ambient temperature. They
work only when the temperature setting is above the ambient temperature.
