Connect frames to vertical corner
brackets
Measure and mark 15mm from inside bracket edge
along frame
Fix the corner brackets using a power drill and the
screws provided
Repeat step 7 and 8 on remaining 2 bracket corners
Repeat step 8, 9 and 10 on all remaining corners to
complete frame
Repeat step 2, 3 and 4 to make the
top frame
Connect top frame to vertical
lengths
5
8
9
10
11
6
7
15mm
RC040 - cube ReFrame®
assembly instructions
www.afibranding.com.au
|
1300 652 514
|
33 Lakewood Blvd, Carrum Downs, Vic, 3201
Applying your custom ReFrame® fabric skin
12
Developed by AFI Branding
Now that you’ve finished assembling your ReFrame®, it’s time to apply your custom ReFrame® fabric skin. Please refer to
either a printed
‘ReFrame® Fabric Installation Guide’
or go to www.reframe.com.au to watch one of our instructional
assembly videos to see how to correctly apply your ReFrame® fabric skin.
NOTE:
The assembly instructions for the RC040 (and included components) illustrate the fundamental steps to assemble a
‘standard’ Cube type ReFrame®. If your Reframe® is oversize, has additional components such as joiners (not shown on this fact
sheet), accessories, or has bends/curves and you are unsure how to proceed with assembly, please contact the team at AFI
Branding on 1300 652 514 and we will guide you through the assembly process.