background image

GLOBAL TRUSS

MANUAL

We would like to thank you for choosing GLOBAL TRUSS trussing and ask for your own safety, to read and 
follow these operating instructions carefully, before first start-up.

GENERAL

This trussing left our factory in perfect condition. If transport damages should be present, do not use this 
product and contact your specialized dealer. To guarantee a safe practice, the safety and warning notes 
listed in these operating instructions must be absolutely considered. Truss systems may only be built and 
dismantled by qualified staff. The warranty claim expires with damage, which is caused by neglect of the 
instructions. The manufacturer does not assume any liability for the damages resulting from it.

1.  DRIFT

•   When rigging, dismantling, or servicing the trussing, make sure the area below installation place is blo 
  cked off.

•  Always fix lowered trusses with an appropriate safety-rope. 

•  Unauthorized modifications on the trussing are forbidden due to safety reasons

1.1  ASSEMBLY

GLOBAL TRUSS products are designed user friendly and offer a convenient assembly. Nevertheless wor-
king with a truss construction requires a certain professional knowledge. Please do not attempt to work 
with truss if you are unsure and lack knowledge; contact a rigging specialist for assistance.

1.  Check the truss, the truss pins, the conical and the safety clips for any damages. If any piece is da   
  maged, do not use it and have it examined by a specialist or replace it with an original GLOBAL TRUSS  
  product.

2. Check that you have all parts.

   

a. 4-Point systems (e.g. F34) consist of 4 conical, 8 truss pins and 8 safety clips

   

b. 3-Point systems (e.g. F33) consist of 3 conical, 6 truss pins and 6 safety clips

   

c. 2-Point systems (e.g. F32) consist of 2 conical, 4 truss pins and 4 safety clips

www.dq.com.au

Summary of Contents for F34

Page 1: ... area below installation place is blo cked off Always fix lowered trusses with an appropriate safety rope Unauthorized modifications on the trussing are forbidden due to safety reasons 1 1 ASSEMBLY GLOBAL TRUSS products are designed user friendly and offer a convenient assembly Nevertheless wor king with a truss construction requires a certain professional knowledge Please do not attempt to work w...

Page 2: ...you use a synthetic or copper ham mer to drive the pin out be careful as the truss pin might fly off when you knock hard with the ham mer 3 Loosen the connection and pull the truss apart 4 Collect and secure all conical truss pins and safety clips 1 3 INSTALLATION Please consider the DIN 15560 and the respective national norms during the installation When rigging dismantling or servicing in an are...

Page 3: ... load due to fall or damage this may not be used any more 1 5 RESPONSIBILITES Always make sure with trussing constructions and or buildings that all local authority regulations are adhered to The characteristics of a structure made from GLOBAL TRUSS components will change by making even the smallest change of parts and therefore a structure should be re tested as described above after such changes...

Page 4: ...nbalan ced and any moving parts should not receive any wear or tear Any electrical connecting cables may not show any sign of damages deposits or material aging Use only original GLOBAL TRUSS spare parts If you have any questions please do not hesitate to contact us info dq com au or visit our website www dq com au for truss datasheets load tables statics and further information LOAD TABLE https d...

Reviews: