BEFORE
YOU BEGIN
8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ASCENT
TRAINER
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASCENT
TRAINER
OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
BOLTS (C)
ARC WASHERS (E)
BOLTS (C)
ARC WASHERS (E)
BOLTS (C)
WASHERS (D)
AXLE
BOLTS (C)
WASHERS (D)
AXLE
BASE RAIL
BASE RAIL
TOP HANDRAIL
MAIN FRAME
REAR
UPRIGHT
BASE RAIL
BRACKET CAPS
BASE RAIL
BRACKET CAPS
WASHER (D)
25 mm
Qty: 4
AXLE
Qty: 2
BOLT (C)
16 mm
Qty: 12
WASHER (D)
25 mm
Qty: 4
BOLT (C)
16 mm
Qty: 12
ARC WASHER (E)
17 mm
Qty: 8
ARC WASHER (E)
17 mm
Qty: 8
Side View
Side View
HARDWARE BAG 2 CONTENTS:
ASSEMBLY STEP 2:
Open
HARDWARE BAG 2
.
Attach the
REAR UPRIGHTS
to the
BASE FRAME
using 4
BOLTS (C)
, 4
WASHERS (D),
4
BASE RAIL BRACKET
CAPS
and 2
AXLES
.
NOTE:
Assemble the
TOP HANDRAILS
so they are parallel to the floor. Do not assemble with the
TOP
HANDRAIL
resting on the floor.
NOTE:
Assemble the
REAR UPRIGHTS
so they curve toward the
MAIN FRAME
as illustrated.
Partially thread the
TOP HANDRAILS
to the
REAR UPRIGHTS
using 8
BOLTS (C)
and
8
ARC WASHERS (E)
.
A
B
C
INCLINE ARM
BOLTS (F)
TOP HANDRAIL
NUTS (G)
BOLT (F)
25 mm
Qty: 4
BOLT (F)
25 mm
Qty: 4
NUT (G)
8 mm
Qty: 4
NUT (G)
8 mm
Qty: 4
HARDWARE BAG CONTENTS:
ASSEMBLY STEP :
Open
HARDWARE BAG 3
.
Attach each
TOP HAND RAIL
to the
INCLINE ARM
using 4
BOLTS (F)
and
4
NUTS (G)
. To make assembly
easier, lightly tighten all four bolts to begin, then tighten firmly after all bolts have been started.
NOTE:
The
INCLINE ARM
extends from the front of the
REAR MAST COVER
.
NOTE:
Tighten all hardware from
Assembly Step 2
.
A
B
ASSEMBLY STEP 2
ASSEMBLY STEP
18.0 AXT Rev.2.4.indd 8-9
9/24/08 1:41:48 PM
