Afag aflex 150 qc, Инструкция по эксплуатации или сборке

Страница: 8 / 119

Page 8 22.10.2019 R01.43
1.2.2 Danger zones
INSTRUCTION
The flexible feeding devices from Afag are built according to EG
machine guidelines, state of the art and the recognized technical
safety regulations. Nevertheless during use, danger to life and
limb of the operators or third parties or impairments to aflex or
other material assets can arise.
Intended use
The aflex serves for the excitation of conveyed goods, in particular piece goods through me-
chanical vibrations. With regard to the maximum permissible dimensions and weights of con-
veyed goods, the instructions in chapter 2.3
Table 1: Technical data
Table 1: Technical data must be observed. Proper use also includes observing all
instructions in the operating manual, as well as observing all safety instructions.
WARNING
The aflex must not be used:
a) In humid and wet areas.
b) At temperatures below 10°C or above 45°C
c) In areas with easily flammable media
d) In areas with explosive media
e) In heavily polluted or dusty environments
f) In an aggressive environment (e.g., saline atmosphere)
Obligations of the operator
A safety-related condition and use of the aflex is the prerequisite for safe operation.
Therefore the operator is obligated to ensure that the following points are complied
with:
Ensure that the aflex is operated by authorized personnel only.
Prohibit hazardous and dangerous work. Check the handling by the staff.
Have the personnel confirm with a signature that the operating instructions have
been understood.
Ensure that a copy of the complete operating manual is permanently accessible at
the aflex.
Check the operating manual regularly for a complete and legible condition.