Afag 50315434 Скачать руководство пользователя страница 23

Страница: 23 / 66

Operating instructions EN

◼

SE-24

◼

01.06.2022

◼

V1.5

–66

4.3 SE-24 performance features

The SE-24 has the following performance features:

▪

Compact construction, the completely closed housing with integrated fastening
adapters can be mounted decentrally near the motor.

▪

Full integration of all components for the controller and power section
including a USB interface (SE-24 Stick) for the PC communication.

▪

Integrated rotary encoder analysis for the incremental encoder with or without
commutation signals.

▪

Integrated output for 24V parking brakes.

▪

Compliance with the current CE and EN standards without the need for
additional external filter measures.

▪

EMC optimised metal housing for decentral fastening near the motor. The
device has a degree of protection IP65.

▪

Integration of all necessary filters within the device for operational (industrial)
compliance with the EMC regulations, e.g. filters for the 24 V power supply as
well as inputs and outputs.

▪

Positioning for current with position analysis.

▪

Jerk-free (S

) or time optimal (trapezoid) positioning, absolute or relative to a

reference point.

▪

User friendly parameterisation with the “afag Tools” PC program.

▪

Simple connection to a higher level controller, e.g. to a PLC via the I/O level or
a fieldbus (Profibus, EtherCAT, CANopen).

Содержание 50315434



































































Результаты поиска

Содержание 50315434

Отзывы:

Бренды по названию

Популярные бренды

Afag 50315434, Руководство по эксплуатации

Результаты поиска

Содержание 50315434

Отзывы:

Бренды по названию

Популярные бренды