R02.1
07/01/2021
Page 19
not inverted passes after a set time the
logic level at LO logic control, if the logic
level does not change again at the en-
trance. For each logic change times are
restarted.
-
Tightening delay is programmed
as if F1 is set O
-
Drop delay is programmed as if F1
is set S
Parameter Level 0 (rolling progression of the parameters)
Table 9:
Parameter Level 0
Parameter
Display
Erklärung
L
Parameter L specifies the logical opera-
tion of the selected inputs based on the
vibratory drive.
As a shortcut AND (U), OR (O) and JAM
(S) can be selected.
There are all inputs are available offering
software programmable. The inputs that
are active links must be identified by se-
lection with 1. The inputs that are to be
disregarded must be identified by selec-
tion with 0.
The truth table of the shortcuts for 2 in-
puts are at the end of the parameter de-
scription.
LE6
LE6 parameters, the possibility of selec-
tion. 0 -> input signal E6 is not included
in the logic function 1 -> input signal E6
is included in the logic link.
LEb
Parameter LEb (status of the vobratory
drive) provides the possibility of selec-
tion.
0 -> input signal Eb is not included in the
logic link
1 -> input signal E6 is included in the
logic link
