R02.1
07/01/2021
Page 23
After 20 seconds without pressing a button, the programming mode is exited and
the origin is displayed without a point.
Frequency Setting
Origin Display.
Push the button.
Parameter Frequency programmed at 50.0 Hz is dis-
played.
Push the button.
Code input is expected.
Push the button.
Push the button.
Push the button.
Push the button.
Dot appears in second LED. Programm mode is active.
The amplitude can be changed.
The value can be changed by the value keys.
For example at 55.8 Hz.
Push the button.
It appears briefly, that the changes were saved.
After 20 seconds without pressing a button, the programming mode is exited and
the origin is displayed without a point.
