Installation, assembly & setting
50 – 64
Assembly instructions EN
CS 16 - CS 20
Date 01.06.2021
Version 6.0
6.10.3 Dismantle ZA-Catch
The procedure for turning the catch with the linkage on the piston rod in the
other acting direction is described below.
Fig. 25
Illustration of ZA-Catch with cylinder
Procedure for change over:
1. Insert cylinder (Fig. 25) with catch (Fig. 25) into the housing. Make sure that
the catch is sufficiently lubricated.
2. Mount the cover.
Make sure that the cylinder connections are on the opposite side of the
catch.
3. Secure cylinder and housing cover with screws (Fig. 25).
The ZA-Catch is changed over.
5
6
7
8
9
10
Catch and linkage
Cylinder
