BESA-12P User’s manual
-
4 -
www.aetool.com
AETOOL LTD.
Page 23
Its result is consistent and repeatable and can be performed numerous times
without heating up the unit. It is very safe as it does not create any sparks when
connected to the battery terminals during testing on the vehicle.
After the test, the results will be stored in its memory and can be reviewed again
later. Also it can be printed directly on the attached mobile printer. It is equipped
with an USB port to be connected to the PC to store the results or have it printed
out from normal computer printer.
1.2 Specifications:
Operating Voltage:
9V ~ 15V DC (max)
Analysing Capacity (Amps):
CCA: 100 A ~ 1700 A
SAE:
100 A ~ 1700 A
JIS#:
100 A ~ 1700 A
IEC:
100 A ~ 1700 A
DIN: 100 A ~ 1000 A
EN: 100 A ~ 1000 A
CA:
100 A ~ 1700 A
DC Volts Accuracy: ± 2% Reading
Battery analysing time:
Less than 7 seconds.
Languages:
Built-in with selection for 10 languages.
PC connection:
Through USB port.
Printer head:
Thermo print head.
Paper width:
57.5mm
0.5mm
Paper roll diameter:
Max. 40mm OD.
Printing Speed:
50mm per sec.
Working Temperature:
0ºC ~ 50ºC.
Working Humidity:
10 % ~ 80 %
