BESA-12P User’s manual
-
39 -
www.aetool.com
AETOOL LTD.
Page 23
(Figure 56):
4. If the voltage drop is too great during the cranking, the tested results will
display as follows (Figure 57) and will prompt you to check the starter
system.
5. During cranking when it detects that there is no drop in voltage, it will
display the following screen (Figure 58).
Figure 56
Figure 57
Figure 58
Result: OK
Min. Volts: 10.56V
Volt Drop: Normal
Press [Exit] to main
menu.
Result: High Drop
Min. Volts: 8.56V
Volt Drop: High
Check starter relay,
battery terminals or
battery has aged.
Press [Exit] to main
menu.
Result: Not detected
No change in volt drop.
Check clamping at
battery side and test
again.
Press [Exit] to main
menu.
