BESA-12P User’s manual
-
16 -
www.aetool.com
AETOOL LTD.
Page 23
Press key will scroll down to the next page to continue reading the text
(Fig. 18) below.
If you wish to continue help on rest of the item like
“Voltage, Battery ratings, Internal R
and LIFE
”, press key anytime will go back to the main menus (Fig. 16).
Here just select the item you want with key and then press key will enter
into the display screen with the explanation text.
To exit press key twice will go back to the main menu for you to begin testing.
(Fig.5)
7.0 - Battery Test
7.1
– Start Testing
Performing Battery Test whilst it is still in the car:
Vehicle that was running has to have its engine OFF first and then switch ON the
headlights for 30 seconds to remove the surface charge. After the headlights had
switched OFF, let the battery rest for at least 1 minute to recover before testing
commences.
The car engine and all other accessory loads must be
OFF
during test in order to
have accurate results. When attaching the analyser clips, make sure that the
battery posts were not oxidized or badly corroded. Clean them first before
clamping to it. Do not clamp onto the steel bolts directly which may give inaccurate
and inconsistent results.
Figure 18
posts. Check battery
rating [CCA, SAE, JIS,
DIN, IEC, EN, CA].Key
the rating values. The
Tester will lead you
through the whole
testing process.
[Exit] to menu.
?
