BESA-12P User’s manual
-
3 -
www.aetool.com
AETOOL LTD.
Page 23
1.0 - Introduction
1.1- BESA-12P (Battery Electrical System Analyser)
This Analyser uses the modern technology in battery testing which can test
batteries as they are without charging before test. Testing procedures are quick
and easy with repeatable results. Test Results can be printed directly on its
attached printer or it can be stored in the computer for records.
1. Battery Test:
Analyses the battery condition using microprocessor controlled testing
methods without the need of fully charging it before test.
The unit consumes very little current during testing hence the test can be
repeated numerous times without worry of draining the battery and its
results are highly accurate.
Extremely safe as it does not create any sparks during clamp on and it
takes less than 7 seconds to obtain the full analysed results of tested
battery.
2. Grounding Test:
Analyses the condition of the electrical return circuit contacts resistance
which were connected to the engine or chassis body from the battery
terminal with results and recommendations display after test.
3. Starter Test:
Checks the cranking effectiveness of the battery to predict when the
battery will fail to crank a vehicle basing on voltage profiles with results
and recommendations display.
4. Alternator Test:
This test checks the alternator charging condition during load at 2,000
RPM and without load at 3,000 RPM with results and recommendations
display after each test.
This Analyser is maintenance free and does not require internal batteries. It
powers up when connected to the battery posts during testing or through an
external 12 Volts DC source for later review of the test results.
The operation is fast and simple. When hooked up to the battery posts, the
displayed instructions on the screen will lead you through and a warning tone to
caution you to perform the correct steps. In event that you need assistance,
there is a key. It will display information about each function when selected.
?
