Chapter 6
INFORMATION ON USE
-
28
-
English
C62
4146
000.fm
ID
M
6.8.
SWITCHING THE MACHINE ON AND OFF
For this operation, proceed in the following way.
1 -Turn the main switch
(A)
to 1 (ON) to power the
machine, "RES" will appear on the display.
2 -Press the "Reset" button
(B)
; the display will enter
stand-by mode.
3 -Set the cycle parameters (see § 6.9.).
4 -Perform the cycle start operations (see § 6.11.).
5 -Turn the main switch
(A)
to 2 (OFF) to turn the ma-
chine off.
6.9.
CYCLE PARAMETER SETTING
For this operation, proceed in the fol-
lowing way.
1 -Switch the machine on (see § 6.8.).
2 -Select the number of the program
(A)
.
3 -Press the key of the parameter to
be modified to display the value set.
The led on the key will turn on (but-
tons
B
-
C
).
4 -Press keys
+
/
-
to increase or de-
crease the value until the required
value is obtained. This new value
will be saved in the relevant pro-
gramme.
Information
If buttons (1 - 2) are contemporane-
ously pressed when turning on, keyboard blocks
and only allows selection of one of the memo-
rized programs. To unlock keyboard, accom-
plish the same operation again.
B
A
IDM-24128800501.tif
IDM-24128801400.tif
B
A
1
2
C
