Chapter 2
TECHNICAL INFORMATION
-
8
-
English
C22
4146
000.fm
ID
M
2.5.
SIGNAL POSITION
The figure illustrates the position of the
safety signals. Their meaning is
explained in § 3.6.
Information
Check that the plates are clearly
readable, and, if necessary, replace
them with new ones that shall be
positioned in the same places as
previously.
2.6.
ELECTRICAL DEVICE DESCRIPTION
The figure shows the positioning of the
devices on board of the machine.
A) Photocell:
detects the presence
and the height of the load to be
wrapped.
B) Carriage limit stop microswitch
:
activates when the spool carriage
reaches the minimum and maximum
wrapping height.
2.7.
TECHNICAL SPECIFICATIONS
Machine
Voltage................................. 220/240 V 1Ph 50/60 Hz
220/240 V 3Ph 50/60 Hz
380/415 V 3Ph+N 50/60 Hz
Installed power ......... 1,4 kw (506-606) - 2,5 KW (706)
Table rotational speed.......................... 4÷12 revs/min.
Carriage up/down speed ............................1÷4 m/min.
Table diam. .......................1650/1800/2200/2400 mm.
Max. load........................................................2000 kg.
Total weight..............................................380÷640 kg.
IDM-24145900300.tif
IDM-24128600801.tif
B
A
