43
13. Adjust the engines position until the thrust
washer is 6 1/2” away from the firewall.
14. Mark the position of the engine mounting holes
on the engine mount. Mark the center of each
engine mounting hole with a center marking tool
or beveled pencil or pen. Ensure the mark is in
the center of the engine mounting hole.
Note:
We recommend the Great Planes Dead
Center Engine Mount Hole Locator
Part #GPMR8130
15. Use a drill bit to drill the engine mounting holes
into the engine mount.
Note:
Drill the engine mounting holes as
straight as possible. Use a drill press if availa-
able.
16. Using (4) 8-32 mounting bolts, lock nuts, and
washers, mount the motor to the mount as shown
below.
Mounting Distance is: 6 1/2”
