AeroVironment TurboDX EVSE-DX, Руководство по установке

Страница: 9 / 24

5
DANGER
2
.
Charger mounting site should be located as close as possible to
the dedicated upstream circuit breaker.
• Area around installation site should be free of debris and clutter.
• Do not install charger near heat source (i.e. furnace, water heater, etc.).
• Keep these instructions for future reference.
• For utility wiring, min. wire gauge size of 10AWG (6mm2) for power and
ground wires.
NOTE: Ensure that the circuit breaker and wire sizes are compliant with local codes. Larger size
(lower AWG) wire may be required in certain regions.
Keep these instructions for future reference.
Risk of shock
Turn off circuit breaker and disconnect switch (if
installed) before installation. Do not restore power to
the outlet until installation is complete. Failure to follow
these instructions could result in shock or electrocution.
Before installation, gather all required parts and tools.