AeroVironment TurboDX EVSE-DX, Руководство по установке

Страница: 23 / 24

19
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that
may cause undesired operation.
This product has been designed to protect against Radio Frequency Interference
(RFI). However, there are some instances where high powered radio signals
or nearby RF producing equipment (i.e. digital phones, RF communications
equipment, etc.) could affect operation.
If you suspect your charger is receiving interference, take the following steps
before contacting Customer Support for service:
1. Relocate nearby electrical appliances or equipment during charging.
2. Turn off nearby electrical appliances or equipment during charging.
Important! Changes or modifications to this product by anyone other than an
authorized service provider will void FCC compliance.
SAFETY FEATURES
The charger is designed with your safety as the highest priority and includes the
following safety features to protect against the risk of electric shock:
•
Service Ground Check: The charger constantly checks for the presence of a
service ground connection. If the service ground ever fails, the charger RED
TROUBLE Indicator turns ON and shuts down power to the vehicle.
•
Thermal Event Sensor: Charger module senses out of ordinary thermal events
and will shut the unit down.
•
GFCI Protection: The charger is equipped with a Ground Fault Circuit
Interruption (GFCI) reaction system to protect against electric shock. If the
charger module detects an output ground fault, it will shut down power to the
output cable and illuminate the RED TROUBLE Indicator.
•
Insulation: The charger module, adapter, cable assembly and charge coupler
are completely insulated (no exposed live parts) to protect against electric
shock.
•
Unintentional Disconnection: The charge coupler is designed to minimize
unintentional disconnection. A pilot signal wire in the cable and charge
coupler eliminates the possibility of electric shock when not connected to a
vehicle or if an unintended disconnect occurs during a charge. Disconnection
during charging
is safe.