background image

20

LIMITED WARRANTY

 

TURBODX CHARGER LIMITED WARRANTY

KEEP RECEIPT FOR WARRANTY CLAIMS. 

Products manufactured by AV are warranted to the original Customer to be free of defects in material 

and workmanship for a period of thirty-six (36) months from the date of installation with the exception 

of the connector which shall be limited to twelve (12) months from the date of installation.  If the 

Product is installed by AV or AV’s authorized installation representatives, AV warrants that the 

installation of the Products shall be free of defects in workmanship for a period of thirty-six (36) months 

from the date of installation. 

THIS IS THE SOLE AND EXCLUSIVE WARRANTY GIVEN BY AV WITH RESPECT TO THE PRODUCTS 

AND INSTALLATION THEREOF, AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, 

EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING WITHOUT 

LIMITATION, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHETHER OR 

NOT THE PURPOSE OR USE HAS BEEN DISCLOSED TO AV IN SPECIFICATIONS, DRAWINGS OR 

OTHERWISE, AND WHETHER OR NOT AV’S PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR 

MANUFACTURED FOR CUSTOMER’S USE OR PURPOSE.

AV’s liability under this warranty shall be limited to repairing or replacing defective Products, at 

AV’s option, without charge, any Product of AV’s manufacture.  AV will not be liable for any costs of 

removal, disposal, installation, transportation, or any other charges which may arise in connection 

with a warranty claim. This warranty shall be voided by damage or wear to products caused by 

abnormal operating conditions (including exposure to acid, chemical fumes, metallic dust or extreme 

temperatures), accident, abuse, damage, misuse, unauthorized alteration or repair, utility surge, Product 

installation by a person not certified in writing by AV, or if the Product was not operated or maintained in 

strict compliance with AV’s printed operating instructions.  Any evidence of an attempt to disassemble 

or reverse engineer the Products will void the warranty.  AV is the final arbiter of the presence of facts 

that support a conclusion that the warranty is voided.

To obtain service under this warranty, the defective Product must have: 1) been installed by AV or 

AV’s authorized installation representative and operated in compliance with AV’s printed operating 

instructions, 2) been registered with AV by Customer upon installation to activate the warranty, and 3) 

proof of purchase (including installation date), failure date, supporting installation and operation data.

Mail Card To: AeroVironment, 1960 Walker Ave, Monrovia, CA 91016 upon installation to activate 
warranty. For additional warranty assistance please call 888-833-2148.

 

Customer Name  .............................................................................

Address .............................................................................................

.............................................................................................................

Phone #..............................................................................................

Email...................................................................................................

Date of Purchase .............................................................................

Serial Number ..................................................................................

To download the User Manual: 

visit www.evsolutions.com/ev-charging-product-resources

PLACE 

SERIAL NUMBER 

STICKER HERE

Содержание TurboDX EVSE-DX

























Отзывы: