FL-100-5 Dual Fuel Level Indicator
Page 14 of 23
Aerospace Logic Inc.
3150 Ridgeway Drive, Unit #43, Mississauga, Ontario, L5L 5R5, CANADA
Tel. (905) 569-3887 | Fax. (416) 352-5854 | [email protected]
www.aerospacelogic.com
FL-100-5 Operations & Installation Manual – Ver. 2.0 – October 24, 2004
SECTION 4
Operation
STEP 1: Power Up
Once power is applied to the instrument it will scroll the text
FL-100
through on the digital display.
Then a
tESt
message will be displayed with all LED elements
of the display lit.
Next the software version will be
displayed. For this instrument it must
be v205.
Finally the instrument will display four
dash characters on the digital display.
This display will remain on the
instrument while it initializes the first
fuel level measurement. This may take
up to 20 seconds to complete. Once the initial fuel level is displayed the instrument is
ready for use.
STEP 2: General Operation – Fuel Level Display
Move the switch to the
L
position to
display the fuel quantity in the LEFT
tank. At the same time the LEFT LED
will light up indicating that the digital
display contains the fuel quantity in the
LEFT tank.
By moving the switch to the
R
position
the display will show the fuel quantity
in the RIGHT tank. At the same time the RIGHT LED will light up indicating that the fuel
quantity indicated in the digital display is for that of the RIGHT tank.
