FL-100-5 Dual Fuel Level Indicator
Page 10 of 23
Aerospace Logic Inc.
3150 Ridgeway Drive, Unit #43, Mississauga, Ontario, L5L 5R5, CANADA
Tel. (905) 569-3887 | Fax. (416) 352-5854 | [email protected]
www.aerospacelogic.com
FL-100-5 Operations & Installation Manual – Ver. 2.0 – October 24, 2004
STEP 12
A number preceded by the letter
L
that will be displayed for
three seconds and then the
L..2
display as in
STEP 14.
If you received this display then note this number on the
calibration sheet from this tank. See
SECTION 5
(Page 16 or
17) or the enclosed copy of the calibration sheet and proceed to
STEP 14
.
If you did not receive this display then proceed to STEP 13.
STEP 13
Error #6, #7 or #8.
If you received this display then see
SECTION 6
to determine
the cause of this error message. The instrument will return to
the
L..1
display until you resolve the error condition.
If you have not completed the installation preparation as
outlined in the
FL-100-5 Installation Checklist and Guide as
well as any applicable manufacturer guidelines
perform it
before continuing with the calibration procedure.
STEP 14
Now add one gallon of fuel to the tank.
Wait 20 seconds for the fuel to settle and move the switch to
the
S
position and back to the
R
position.
Once the switch is in the
R
position the instrument will display
the next fuel quantity level to calibrate after displaying the
calibration value that you need to record, as in
STEP 12
.
