19
Figure 50
Figure 51
Along the left leading edge:
Open the main sprog access zipper and look inside, making sure that the crossbar / leading
edge junction, the main sprog and the main sprog wire are properly secured. Check the sprog
hardware, and the sprog cable attachments at both ends of each sprog cable. Close the main
sprog access zipper (fig. 52).
Open the outer sprog access zipper and check the sprog hardware and the sprog cable
attachments at both ends of the sprog cable (fig. 53).
Figure 52
Figure 53
CAUTION
REMEMBER TO SLIDE THE SPROG NEOPRENE COVER BACK ON PLACE TO COVER
THE JOINT. CLOSE THE ACCESS ZIPPERS.
Figure 54
Check that the strut is properly secured,
safety wire is engaged and the safety ring is
installed (fig. 54).
