
2
Air Finish nailer LT50
Http://www.aeroprotools.com
Content:
1 Technical data 2.7 Actuating systems
1.1 Fastener 3 Compressed air system
1.2 Accessories 4 Preparing the tool for use
1.3 Description/Features 4.1 Preparing a tool for first operation
1.4 Location of Parts 4.2 Connection to the Compressed air system
2 Special references 4.3 Filling the magazine
2.1 Regulations 4.4 Handling the tool
2.2 Noise emission 5. Maintenance
2.3 information on mechanical impact (vibration) 6 Troubleshooting
2.4 Safety of fastener driving tool 7 explode drawing
2.5 Safety at work 8 Spare parts list
2.6 Triggering devices
1 Technical data
Type of tool ……………………………………………………………… LT50
Activation mode ………………………………………………………single sequential
Outline dimension
……………………………………………………………80x280x303mm
Weight
(without fasteners)………………………………………………...2.3kgs (5.06Lb)
Required pressure
………………………………………………………….70-110PSI (4.8-7.5bar)
Max. pressure
………………………………………………………………..120PSI (8.3bar)
Recommended lubricant………………………………………………….white mineral oil 10
#
1.1 Fastener
Fastener size
:
Ga16 (1.6x1.4mm)
Nail length: 20-50mm
Magazine capacity:90pcs
1.2 Accessories
Hexagon Key
Lubricant
Operating instruction
1.3 Description/Features
Innovative design with light weight
Easily open magazine latch for fast loading by one hand
Continuous operation for high efficiency
Heat treated air inlet plug prolonged the life.
1.4 locations of Parts
(see Figure 1)
A-Magazine
B-Safety Yoke
C-Trigger
D-Exhaust Vent
E- Air Quick Coupler
D
D
C
E
B
A