1. WARNINGS REGARDING THE DOCUMENTATION
FUNDAMENTAL SAFETY RULES
2.
PRODUCT IDENTIFICATION
3.
USE IN COMPLIANCE WITH
1.1.
THE DOCUMENTATION
AERMEC VXT heat pumps are
constructed according to the
recognised technical standards and
safety regulations. However, dangers
to the user or third parties may arise,
as well as damage to the appliance and
other objects, in the event of improper
use not in compliance with the type of
use envisaged.
The VXT heat pumps are designed as
heat generators for centralised closed
cooling systems and for systems
producing domestic hot water (DHW).
Any use not expressly indicated in this
manual is not permitted. Consequently
AERMEC will not assume any
responsibility for damage that may
occur due to failure to comply with
these instructions.
PRESERVATION OF THE
1.2.
DOCUMENTATION
The installation instructions along with all
the related documentation must be given
to the user of the system, who assumes
the responsibility to keep the instructions
so that they are always at hand in case
of need.
READ THIS DOCUMENT CAREFULLY,
the installation of the appliance must
be carried out by qualified and suitably
prepared staff in compliance with the
national legislation effective in the country
of destination. (Ministerial Decree
329/2004).
The appliance must be installed in such
a way as to enable maintenance and/or
repairs to be carried out. The appliance
warranty does not cover the costs for
ladder trucks, scaffolding, or other
elevation systems that may become
necessary for carrying out servicing
under warranty.
The validity of the warranty shall be void
in the event of failure to comply with the
above-mentioned indications.
We remind you that the use of products
that employ electrical energy and water
requires that a number of essential
safety rules be followed, including:
This appliance is not suitable for
−
use by persons (including children)
with limited physical, sensory, or
mental capacities or those lacking
experience or knowledge, unless
they are supervised or instructed
regarding the use of the appliance
by a person who is responsible for
their safety. Children must always be
supervised to ensure they do not play
with the appliance.
It is prohibited to carry out any
−
technical or maintenance operation
before the unit has been disconnected
from the electrical mains by switching
off the master switch of the system
and the main power switch on the
control panel.
It is prohibited to modify the safety
−
or adjustment devices without the
manufacturer’s authorisation and
precise instructions
It is prohibited to pull, detach, or twist
−
the electrical cables coming from the
unit even if it is disconnected from
the electrical mains
It is prohibited to leave containers
−
and flammable substances near to
the chiller.
It is prohibited to touch the appliance
−
when you are barefoot and with parts
of the body that are wet or damp.
It is prohibited to open the doors
−
for accessing the internal parts of
the appliance without first having
switched off the master switch of the
system.
It is prohibited to disperse, abandon
−
or leave the packing materials within
the reach of children, as they are a
potential source of danger.
The VXT can be identified by:
−
Packaging label
which shows the product identification
data
−
Technical plate
positioned on the base inside the
machine.
NOTE
Tampering, removal, lack of the
identification plate or other does not
allow the safe identification of the
product and will make any installation
or maintenance operation to be
performed difficult.
Identification plate
Fig.1.
5
