WARNINGS REGARDING DOCUMENTATION
17.
FUNDAMENTAL SAFETY REGULATIONS
18.
PRODUCT IDENTIFICATION
19.
USE IN COMPLIANCE WITH
17.1.
DESTINATION
The AERMEC VXT heat pumps water/
water are constructed according to
the recognised technical standards
and safety regulations. In spite of this,
dangers to the user or third parties
may arise, as well as damage to the
appliance and other objects, in the
event of improper use and use that is
not in compliance with that envisioned.
The VXT heat pumps are designed
as heat generators for centralised
cooling closed systems and for plants
producing domestic hot water (DHW.).
Any use not expressly indicated in this
manual is not permitted Consequently
AERMEC will not assume any
responsibility for damage that may
occur due to failure to comply with
these instructions
PRESERVATION OF THE
17.2.
DOCUMENTATION
The installation instructions, along with
all the related documentation, must be
given to the user of the system, who
assumes the responsibility of keeping the
instructions so that they are always at
hand in case of need.
READ THIS DOCUMENT CAREFULLY,
the
appliance must be installed by qualified
and suitably prepared staff in compliance
with the national legislation effective in
the country of destination. (Ministerial
Decree 329/2004).
The appliance must be installed so that
maintenance and/or repairs can be
carried out. The appliance warranty
does not cover the costs for ladders,
scaffolding, or other elevation systems
that may become necessary for carrying
out servicing under warranty
The validity of the warranty shall be void
in the event of failure to comply with the
above-mentioned indications.
We remind you that the use of products
that employ electrical energy and water
requires that a number of essential
safety rules be followed, such as:
This appliance is not suitable for
−
use by persons (including children)
with limited physical, sensory, or
mental capacities or those lacking
experience or know-how, unless
they are supervised or instructed
regarding the use of the appliance
by a person who is responsible for
their safety. Children must always be
supervised to ensure they do not play
with the appliance.
It is prohibited to carry out any
−
technical or maintenance operation
before the unit has been disconnected
from the electrical mains by switching
off the master switch of the system
and the main power switch on the
control panel.
It is prohibited to modify the safety
−
or adjustment devices without the
manufacturer’s authorisation and
precise instructions
It is prohibited to pull, disconnect, or
−
twist the electrical cables coming
from the unit even if disconnected
from the electrical mains.
It is prohibited to leave containers
−
and flammable substances near to
the chiller.
It is prohibited to touch the appliance
−
when you are barefoot and with parts
of the body that are wet or damp.
It is prohibited to open the access
hatches to the internal parts of
the appliance without first having
switched off the system master
switch.
It is prohibited to disperse or abandon
−
the packing materials and they must
be kept out of the reach of children,
as they are a potential source of
danger.
The VXT can be identified by:
−
Packing label
that reports the identification data of
the product
−
Technical plate
positioned on the base inside the
machine.
NOTE
Tampering, removal, lack of the
identification plate or other does
not allow safe identification of the
product and will make any installation
or maintenance operation to be
performed difficult.
Identification plate
Fig.3.
31
