![AERMEC FCLI 122 Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/aermec/fcli-122/fcli-122_technical-manual_2862000008.webp)
8
IFCLITY1106 - 5773010_01
BASE
The unit is characterised by a reinforced,
integral metal structure with insulation
in expanded polystyrene obtained from
injection moulding for purposes of
noise reduction and air routing. The
load-bearing base is in galvanised sheet
steel and is varnished with polyester
powders. The following are fixed to
the base: fixing brackets, coils, motor
and fan, condensate discharge pump,
attachment plate, control board unit
and condensate drip tray. By means
of the flanges, it allows the channels
(for renewing environmental air and/
or delivery to an adjacent room) to be
joined to the sides.
FASTENING BRACKETS
Galvanised steel brackets for attaching the
unit to the ceiling.
TRAY
Tray closing off the unit. Made of injection
co-moulded polystyrene to avoid
thermal dispersion and the formation
of condensate, it conveys conditioned
air towards the fins and from the
condensate drip tray.
The air suction conveyor is equipped with
a protective grille that impedes access to
the moving fan.
THERMAL EXCHANGE COIL
The coils used have copper pipes and
corrugated or turbulent aluminium fins.
They are designed to offer the maximum
heat exchange surface. All batteries are
provided with air bleed pipes and water
drain valves, located respectively on the
highest and lowest point of the battery
circulation.
INTERNAL THREE-WAY VALVE
Standard on standard versions. Internal
all-or-nothing type 3-way valve, with
fast connection actuator and visual
signalling of the position, assembled
as standard on the heating/cooling coil.
Powered with a voltage of 230V ~ 50Hz.
FAN UNIT
The fan unit, with the latest axial-
centrifugal fan designed to obtain low-
sound emissions, is dynamically and
statically balanced.
The fan unit can be easily accessed for
cleaning and maintenance.
BRUSHLESS ELECTRIC MOTOR WITH
INVERTER CONTROL
The "brushless electric motor with
Hall sensors" and the control system
used in the AERMEC FCXI fan coils
MAIN COMPONENTS
1 Grille with air filter (GLLI)
2 Air delivery deflector (GLLI)
3 Grille frame (GLLI)
4 Tray
5 Inverter device
6 Base unit
7 Fastening brackets
8 Electrical box
9 Water connections (only for 4 pipes)
10 Water connections (2 pipes)
11 Air drain valve
12 Push-out, coupling for air delivery in
an adjacent room
13 Condensate drain
FCLI (module 600)
GLLI 10
FCLI (Module 840)
GLLI 20
13
12
8
9
10
7
6
4
3
2
1
5
9
13
12
8
11 10
7
6
4
3
2
5
11
DESCRIPTION OF COMPONENTS
1