Aeris A300 CS, Руководство по эксплуатации

Страница: 12 / 64

12
A300 CS OPERATING MANUAL
© 2002 Design, 2014 Doc. No. 12-7287-r03 (7/14/14)
HOME MENU
The Home Menu is displayed after activation and diagnostics. When the NORM, GAUG, FREE, or Compass Surface Main
screen is displayed, the Home Menu can be accessed by pressing M for 2 seconds.
• At any time while operating in the Home Menu system, pressing M (2 sec) will revert to the Home Menu screen.
• Operation will also revert to the Home Menu screen if no button is pressed within a 2 minute period.
Selections include (Fig. 11) -
> MY INFO - select to view personal information entered using the PC or Mac interface program.
> DC INFO - select to view information describing the dive computer, or to clear residual Ni-O2 used for calculations.
> SETUP - select to access the Setup Menu.
> LOG - select to access the NORM/GAUG Log data recorded for viewing.
> HISTORY - select to access the NORM/GAUG History data recorded for viewing.
> NORM - select to access the NORM operating mode for scuba activities.
> GAUG - select to access the GAUG operating mode for scuba activities.
> FREE - select to access the FREE operating mode for breath hold diving activities.
> COMPASS - select to access the Compass operating mode for navigation.
• A (2 sec) - to access Adjust Brightness (refer to page 8).
• A (< 2 sec) - to step forward (down) through the Menu selections. Down the left column, then down the right column.
• M (< 2 sec) - to step back (up) through the selections.
• S (< 2 sec) - to access the highlighted selection.
MY INfO (view only)
Up to 7 lines of information containing up to 16 characters each can be entered using the PC or Mac interface system.
Prior to personal information being entered, a graphic message is displayed as a reminder to enter your data (Fig. 12A).
Examples of information that can be entered include (Fig. 12B):
> Name.
> Phone number.
> Address.
> Medical.
> Emergency contact.
• S (2 sec) - to step back to the Home Menu.
DC INfO (view only)
This information should be recorded and kept, it will be required in the event that your unit requires factory service.
Information displayed with the screen title includes (Fig. 13):
> Model - assigned by the factory.
> Serial number - assigned by the factory.
> Firmware revision* - level currently installed in the unit.
> Date of last calibration - assigned by the factory.
*This number will change if Firmware is updated by factory service or by future download of revised firmware from the AERIS web site.
• S (2 sec) - to step back to the Home Menu.
• S (< 2 sec) - to access the Clear Ni-O2 Calculations screen.
CLEAR NI-O2 CALCULATIONS
This feature gives you the ability to reset the unit, clearing all nitrogen and oxygen calculations.
Information displayed with the screen title includes (Fig. 14):
> Graphics ENTER CODE TO CLEAR NI - O2 CALCULATIONS.
> 4 digit number (xx - yy, some random assignment by the factory, not 20 - 02 which is the correct reset code).
• S (2 sec) - to revert to the DC INFO screen, if you want to exit the routine without resetting the unit.
Reset procedure:
• S (< 2 sec) - to start the first 2 digits (xx on the left) flashing.
• A (hold) - to scroll upward through the first digits (xx) 4 per sec.
• A (< 2 sec) - to step upward through the digits (xx) one at a time.
• M (< 2 sec) - to step back through the digits (xx) one at a time.
• S (< 2 sec) - to save the first 2 digits (xx) and flash the second 2 digits (yy on the right).
• A (hold) - to scroll upward through the second digits (yy) 4 per sec.
• A (< 2 sec) - to step upward through the digits (yy) one at a time.
• M (< 2 sec) - to step back through the digits (yy) one at a time.
• S (< 2 sec) - to save the Reset Code, clear the unit (if (20 - 02), and turn the unit off with all nitrogen/oxygen calculations
and data being erased..
• S (2 sec) - to revert to the DC INFO screen, if you want to exit the routine without resetting the unit.
HOME MENU
MY INFO
DC INFO
SETUP
LOG
HISTORY
NORM
GAUG
FREE
COMPASS
BATT
Fig. 11 - BRIGHTNESS
ADJUSTMENT
MY INFO
USE
PC/MAC PROGRAM
TO ENTER
YOUR DATA
ACI/DIVERLOG
MY INFO
DEBRA DIVER
SAN LEANDRO, CA
BLOOD TYPE A+
EMERG. CONTACT:
DAVID DIVER
510-569-3100
510-346-0010
DC INFO
MODEL = A300 CS
FIRMWARE = R1A
S E R I A L N O. = 1 2 3 4 5 6
L A S T C A L =
1 . 2 6 . 1 4
CLEAR NI-O2 CALC
ENTER CODE TO
CALCULATIONS
C L E A R N I - O
2
2 0 - 0 2
Fig. 12A - MY INFO
(prior to any entries)
Fig. 12B - MY INFO
(sample of entries made)
Fig. 13 - DC INFO
(sample of entries made)
Fig. 14 - CLEAR
(sample of entries made)