aerauliqa CTRL-HS, Инструкция по эксплуатации

Страница: 20 / 28

20
4.3 SETTING OF THE MODBUS ADDRESS
1
Set address #1
Available
2
Set address #2
Available
3
Set address #3
Available
4
Set address #4
Unavailable
Make sure that only the selected fan is
connected to the Modbus network
WARNING
ATTENTION: To set the Modbus address to each fan, only the selected fan must communicate on the Modbus
network. Therefore, it is recommended that each fan has a dedicated power supply switch.
Button Description
Back to the previous screen
Back to the Home Page
Set
address #1
Setting of the Modbus address of fan #1
Set
address #2
Setting of the Modbus address of fan #2
Set
address #3
Setting of the Modbus address of fan #3
Set
address #4
Setting of the Modbus address of fan #4
The Modbus address can be “Available” or “Unavailable” depending on the number of fans in the system (paragraph 4.2)
Button Description
Back to the previous screen
Confirm
Confirm and assignment of the Modbus address: repeat this operation for each available fan
Cancel
Cancellation of the operation and back to the previous screen
If a fan with an available Modbus address is selected, the following screen is displayed:
Cancel Confirm
The selected Modbus address will be
broadcasted over the network. Confirm?