aerauliqa CTRL-HS, Инструкция по эксплуатации

Страница: 26 / 28

26
4.7 MOTOR INFORMATION
Modbus
Run time: 31100 hours
Default Set: 3200
4.8 CONTROL SETTING
Modbus
In analog mode you cannot adjust
the speed with this controller
WARNING
Current mode:
Modbus
Set
Control mode
Button Description
Back to the previous screen
Back to the Home Page
Selection of the fan number
Alarm Modbus: the symbol is displayed and blinks if one of the fans does not communicate on the Modbus
network. Touching it the “Alarm identification” screen of the faulty fan is accessed (paragraph 4.4)
Run time
Run hour counter of the motor
Default set
Indication of the motor parameters
Button Description
Back to the previous screen
Back to the Home Page
Set
Setting between Modbus or Analogic. In Analogic mode the fan speed and the Run/Stop mode can not be set
with the CTRL-HS. Any other functionality remains active
Selection of the fan number
Alarm Modbus: the symbol is displayed and blinks if one of the fans does not communicate on the Modbus network.
Touching it, the “Alarm identification” screen of the faulty fan is accessed (paragraph 4.4)
Modbus
Modbus