aerauliqa CTRL-HS, Инструкция по эксплуатации

Страница: 18 / 28

18
4.1 HOME PAGE
4.OPERATION
Run
Modbus
15.5
Alarm
10 %
rpm
Button Description
Selection between “Run” mode (fan rotates) or “Stop” (fans does not rotate)
Fan settings (paragraph 4.5)
Selection of the air flow direction (if available): touching the icons you can change the flow direction. The
selected icon turns blue after few seconds.
Fan selection: touching the icon the fan number can be selected
Speed seeting: touching the symbols or the speed (%) of the selected fan increases or decreases. The
actual motor speed is displayed (rpm). To set the speed limits, refer to paragraph 4.6
Alarm Modbus: the symbol is displayed and blinks if one of the fans does not communicate on the Modbus
network. Touching it, the “Alarm identification” screen of the faulty fan is accessed (paragraph 4.4)
Alarm: the symbol is displayed if one of the fans has one or more alarms active. Touching it, the “Alarm
identification” screen of the fan is accessed (paragraph 4.6)
Modbus
Alarm