AEQ Phoenix Stratos Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 127

background image

AEQ

PHOENIX STRATOS

47

3.1.8.5. RS-232 Ancillary Data.

The PHOENIX STRATOS allows you to perform a bidirectional data transmission between units
by  means  of  COM  rear  connector.  This  option  may  be  useful  in  order  to  send  files  from  one
location to another, or also to control remotely other units with RS232 serial interface. Data are
embedded  in  audio  streams.  At  the  moment,  this  option  is  available  for  ISDN  communications
(at 64 and 128Kbps) with MPEG-1 y 2 LII encoding modes (bit rates: 16, 24, 32 and 48 KHz).

The  “RS-232  Ancillary  Data”  menu  allows  you  to  configure  wheter  the  ancillary  data
transmission will be used or not (ACTIVATE ON/OFF), as well as the associated audio channel
(AUDIO CHANNEL: CH1 or CH2). Transmission speed is also shown as additional information
(it can’t be modified), fixed at 9600 bps (BAUD RATE = 9600).

Ancillary Data menu detail

This information transmission does not cause a noticeable loss of audio quality, specially when
using the 128Kbps modes.

3.1.8.6. Remote configuration.

The  WEB  SERVER  USERS  submenu  enables  you  to  configure  the  name  and  password
associated  with  the  remote  control  and  configuration  WebBrowser  user.  To  obtain  more
information,  we  recommend  consulting  section  “7.  CONTROL  TERMINAL  OVER  WEB
BROWSER“ in this manual.

WEB SERVER USERS menu detail

3.1.9. SIP PROVIDERS menu.

Configuration  menu  for  the  parameters  associated  with  operation  over  an  external  SIP  server.
Accessible from the SYSTEM MENU, in the ninth option, by pressing the rotary encoder.

In the SIP PROVIDERS menu you can store up to eight different configurations to work with as
many  as  eight  different  external  SIP  servers.  As  indicated  in  chapter  one  of  this manual,  AEQ
offers, at no additional cost, the services of its 2 dedicated SIP servers, and therefore the first
2  entries  in  the  SIP  PROVIDERS  menu  include  the  relevant  values,  leaving  the  rest  of  the
entries at your disposal for future configurations. For further information, see ANNEXE C4.3.

SIP PROVIDERS menu detail

«
...
45
46
47
48
49
...
»

Содержание Phoenix Stratos
































































































































Отзывы:

Нет отзывов

Похожие инструкции для Phoenix Stratos

Бренд: Dahua Страницы: 58

Бренд: WaterCop Страницы: 4

Бренд: JETI model Страницы: 64

Бренд: Korg Страницы: 6

Бренд: Metra Electronics Страницы: 8

Бренд: 2VV Страницы: 19

Бренд: 2VV Страницы: 24

Бренд: Pioneer Страницы: 6

Бренд: Pioneer Страницы: 6

Бренд: Pioneer Страницы: 7

Бренд: Pioneer Страницы: 8

Бренд: Pioneer Страницы: 86

DEH-P2550 XN/ES

Бренд: Pioneer Страницы: 59

Бренд: Pioneer Страницы: 61

Бренд: Pioneer Страницы: 80

Бренд: Pioneer Страницы: 74

Бренд: Pioneer Страницы: 84

Бренд: Pioneer Страницы: 108

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды