17
8
devices (aka a scene) with the push of a
single button.
If you set your Key Fob up as a primary
controller in the previous steps by
creating a new network, each button is
capable of controlling 1 individual scene.
If you added your Key Fob to an existing
Z-Wave network, it can control either 1
or 2 individual scenes per button. The
distinction here is whether your Key Fob
is Use (Group) Mode or in Use (Scene)
Mode. In Use (Group) Mode, you can
control 1 scene from each button. In Use
(Scene) Mode you can control 2 different
scenes from each button.
The following sections give directions on
creating scenes relative to how your Key
Fob is setup.
In this mode, each of the 4 different
scenes which your Key Fob can control
will need to be manually programmed.
Your Key Fob is a primary controller.
Each brand of Z-Wave gateway / hub
has its own unique method for setting
your Key Fob’s user mode as a Group
or Scene controller. Please refer to your
gateway’s user manual for detailed
instructions on this. In some cases, you
will need to utilise the technical parameter
settings available in your Key Fob.
1. Go to the parameter settings page,
specific to your Key Fob, within your
gateway’s user interface.
2. If it does not already exist, add a new
row or column to add Parameter
number 250.
3. Set the size of the parameter to be 1
byte.
4. Set the value in order to place your
Key Fob into Group or Scene Mode.
Group Mode has a value of 0, Scene
Mode has a value of 1.
Model Number: ZW088
Battery: lithium cell CR2450 3 volt battery
Operating temperature: -10 to 50
Technical specifications.
C
C
