Your Key Fob is now powered on for the
first time. As it’s the first time you’re using
it, it is by default in Setup Mode.
Now you need to either create a new
Z-Wave network for your Key Fob to
control, or to add it to your existing
network.
During the following steps, your Key Fob
should be in close to your primary Z-Wave
controller. This is likely to be a gateway or
hub.
1. Put your primary Z-Wave controller
into inclusion mode. If you’re unsure
of how to do this, refer to the part of
its user manual that describes adding
new Z-Wave devices to your network.
2. Press the Learn button on your Key
Fob with the pin or press the bottom-
right action button. Your Key Fob’s
green light will begin to pulse.
If you already have an existing
Z-Wave network.
4
21
IN NO EVENT SHALL AEON LABS BE
LIABLE FOR ANY INDIRECT, INCIDENTAL,
PUNITIVE, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR DAMAGES FOR LOSS OF
PROFITS, REVENUE, OR USE INCURRED
BY CUSTOMER OR ANY THIRD PARTY,
WHETHER IN AN ACTION IN CONTRACT, OR
TORT, OR OTHERWISE EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
AEON LABS' LIABILITY AND CUSTOMER'S
EXCLUSIVE REMEDY FOR ANY CAUSE OF
ACTION ARISING IN CONNECTION WITH
THIS AGREEMENT OR THE SALE OR USE
OF THE PRODUCTS, WHETHER BASED ON
NEGLIGENCE, STRICT LIABILITY, BREACH
OF WARRANTY, BREACH OF AGREEMENT,
OR EQUITABLE PRINCIPLES, IS EXPRESSLY
LIMITED TO, AT AEON LABS' OPTION,
REPLACEMENT OF, OR REPAYMENT OF
THE PURCHASE PRICE FOR THAT PORTION
actual or alleged infringement or
misappropriation of any patent,
trademark, mask work, copyright, trade
secret or any actual or alleged violation
of any other intellectual property rights
arising from or in connection with the
products, except to the extent that such
infringement exists as a result of Aeon
Labs' manufacturing processes.
