9
16
Please refer to the ‘Selecting which
devices to control’ section of this guide for
a step-by-step instruction on how to do
this.
By default your Key Fob, when added
to an existing network, is in Use (Group)
Mode. To change the mode please refer
to the ‘Setting your Key Fob’s use mode’
under the ‘Advanced Function’ section of
this manual.
Your Key Fob is a secondary controller.
Your Key Fob is in Use (Group) Mode.
In order to program each button of your
Key Fob, please refer to the ‘Selecting
which devices to control’ section of this
guide.
Your Key Fob is in Use (Scene) Mode.
In this mode your Key Fob communicates
directly with your Z-Wave network’s
primary controller, generally a gateway
or hub. By pressing each scene button,
2. Press the Z-Wave button on the
device. If you’re unsure of how to do
this, refer to its user manual.
3. If the device has been disassociated,
your Key Fob’s green light will stop
blinking and the red light will stay
illuminated.
4. Release the button you held down in
step 1.
5. Repeat the above steps to remove
other Z-Wave devices.
1. Press and hold the Mode button for
20 seconds with a pin.
2. The green and red light will alternate
for 20 seconds, then the green light
will stay solid for 2 seconds to indicate
a successful reset.
Your Key Fob can be reset to default
factory settings with ease .
Resetting your Key Fob.
Setting your Key Fob’s use mode.
