Your Key Fob can be set up as the primary
controller of a Z-Wave network. This is
3. Once the controller and your Key
Fob have successfully exchanged
information, the green light on your
remote will stay lit for 2 seconds. If
the exchange of information fails, the
red light on your remote will stay lit
for 2 seconds. If this occurs, please
repeat the process from step 1
ensuring that your primary Z-Wave
controller is in inclusion mode.
Your Key Fob will now work as a remote
control within your Z-Wave network,
allowing it to both control associated
devices and act as a tool for adding
devices to and removing devices from
your Z-Wave network.
Please skip to the ‘Change your remote’s
mode’ section of this guide to continue.
If you need to create a new Z-Wave
network.
5
20
Customer must prepay shipping and
transportation charges for returned
Products, and insure the shipment or
accept the risk of loss or damage during
such shipment and transportation. Aeon
Labs will ship the repaired or replacement
products to Customer freight prepaid.
Customer shall indemnify, defend,
and hold Aeon Labs and Aeon Labs'
affiliates, shareholders, directors, officers,
employees, contractors, agents and
other representatives harmless from all
demands, claims, actions, causes of
action,proceedings, suits, assessments,
losses, damages, liabilities, settlements,
judgments, fines, penalties, interest,
costs and expenses (including fees and
disbursements of counsel) of every kind
(i) based upon personal injury or death or
injury to property to the extent any of the
foregoing is proximately caused either by
a defective product (including strict liability
in tort) or by the negligent or willful acts
or omissions of Customer or its officers,
employees, subcontractors or agents,
and/or (ii) arising from or relating to any
