Power Quality Analyzer Model 3945
69
recording will usually still exist but with the fi rst letter of its name changed to “@”.
The start and end times requested for the recording might be adjusted by the
PowerPad™ to be in even multiples of the averaging period. For instance, if an
integration period of 10 minutes were requested, and the start time was 9:03, the
recording might not actually begin until 9:10.
6.7.6 Transients
Confi guration
The Transients window allows you to set up the criteria for capturing transients.
Figure 6-8
1. Type a name for the session, up to seven characters.
2. Select the date and time to end the search for transients.
3. Select the percent deviation for voltage and current transients. The choices
available from the drop down window are 1, 2, 5, 10, 20, 50 and 100% of the
full scale range of measurement. See § 5.4 for detailed information on these
values.
4. Select the maximum number of transients to capture (from 1 to 50).
Clear Screen:
Clears the fi elds that were already entered for a new transient
search. This button doesn’t cause any changes on the PowerPad™.
