AEMC instruments 6422 Скачать руководство пользователя страница 42

Страница: 42 / 44

Ground Resistance Testers Models 6422 & 6424

4.4 TECHNICAL ASSISTANCE

If you are experiencing any technical problems or require any assistance with the

proper operation or application of your instrument, please call, e-mail or fax our

technical support team:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

Phone: (800) 343-1391 (Ext. 351)

Fax:

(603) 742-2346

E-mail:

[email protected]

www.aemc.com

4.5 LIMITED WARRANTY

The instrument is warrantied to the owner for a period of two years from the date

of original purchase against defects in manufacture. date of original purchase

against defects in manufacture. This limited warranty is given by AEMC

Instruments, not by the distributor from whom it was purchased. This warranty

is void if the unit has been tampered with, abused, or if the defect is related to

service not performed by AEMC

Instruments.

Full warranty coverage and product registration is available on our website

www.aemc.com/warranty.html

Please print the online Warranty Coverage Information for your records.

What AEMC

Instruments will do:

If a malfunction occurs within the warranty period, you may return the instrument

to us for repair, provided we have your warranty registration information on file or

a proof of purchase. AEMC

Instruments will repair or replace the faulty material

at our discretion.

REGISTER ONLINE AT:

www.aemc.com/warranty.html

Содержание 6422













































Результаты поиска

Содержание 6422

Отзывы:

Бренды по названию

Популярные бренды

AEMC instruments 6422, Руководство пользователя

Результаты поиска

Содержание 6422

Отзывы:

Бренды по названию

Популярные бренды