AEMC instruments 6422 Скачать руководство пользователя страница 41

Страница: 41 / 44

Ground Resistance Testers Models 6422 & 6424

4. MAINTENANCE

4.1 CLEANING

Disconnect the instrument from all leads, probes, etc. and turn it OFF.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and

dry rapidly with a dry cloth or forced air. Do not use alcohol, solvents, or

hydrocarbons.

4.2 BATTERY REPLACEMENT

1.  Disconnect the instrument from all leads, probes, etc. and turn it OFF.
2.  Open the battery compartment as instructed in § 1.1.
3.  Remove the old batteries.
4.  Insert new batteries as instructed in § 1.1.

NOTE:

Spent batteries must not be treated as ordinary household

waste. Take them to the appropriate recycling collection facility.

4.3 REPAIR AND CALIBRATION

To ensure that your instrument meets factory specifications, we recommend that

it be sent back to our factory Service Center at one-year intervals for recalibration

or as required by other standards or internal procedures.

For instrument repair and calibration:

You must contact our Service Center for a Customer Service Authorization

Number (CSA#). Send an email to

[email protected]

requesting a CSA#,

you will be provided a CSA Form and other required paperwork along with the

next steps to complete the request. Then return the instrument along with the

signed CSA Form. This will ensure that when your instrument arrives, it will be

tracked and processed promptly. Please write the CSA# on the outside of the

shipping container. If the instrument is returned for calibration, we need to know

if you want a standard calibration or a calibration traceable to N.I.S.T. (includes

calibration certificate plus recorded calibration data).

Ship To:

Chauvin Arnoux

, Inc. d.b.a. AEMC

Instruments

15 Faraday Drive ▪ Dover, NH 03820 USA

Phone: (800) 945-2362 (Ext. 360) / (603) 749-6434 (Ext. 360)

Fax: (603) 742-2346

E-mail:

[email protected]

(Or contact your authorized distributor.)

to N.I.S.T.

NOTE: You must obtain a CSA# before returning any instrument

Содержание 6422













































Результаты поиска

Содержание 6422

Отзывы:

Бренды по названию

Популярные бренды

AEMC instruments 6422, Руководство пользователя

Результаты поиска

Содержание 6422

Отзывы:

Бренды по названию

Популярные бренды