AEI DK-2822, Руководство пользователя

Страница: 44 / 70

44
DATA OUTPUT MODES VALIDATION LOCATION
, , or
(2) (3) (1)
WIEGAND DATA OUTPUT MODES (Location 92)
(1) LOCATION
Key in Location
(2) DATA OUTPUT MODES
---
Wiegand Data Output Disabled (Default)
No Wiegand data output
---
Wiegand Data Output Enabled – Mode “A”
The keypad gives Wiegand data output
ONLY
for those cards and codes that have been
registered in memory.
---
Wiegand Data Output Enabled – Mode “B”
The keypad gives Wiegand data output for
ALL
the cards and codes that are read; no matter
they are registered or not registered in memory.
This mode makes the keypad to work as an independent keypad or as a server of a
split-decoded keypad for door lock actuation; and at the same time serves optional controller
that utilizes the Wiegand data for different jobs.
The keypad discriminates the registered and non-registered cards and codes with different
beeps when it sends out the Wiegand data; successful beeps for the registered cards and codes
and five beeps for the non-registers.
The keypad follows the lock-up setting at Location 60
---
Wiegand Data Output Enabled – Mode “C”
This is the
Reader Mode
of the keypad. It gives Wiegand data output for
ALL
the cards and
codes that are read; no matter they are registered or not registered in memory.
This mode makes the keypad to work as an independent keypad or as a server of a
split-decoded keypad for door lock actuation and at the same time serves optional controller
that utilizes Wiegand data for different jobs.
The keypad ALWAYS gives successful beeps when it sends out the Wiegand data after reading
a card or code.
The keypad does not follow the lock-up setting at Location 60 and disables it automatically in
Mode “C” to make it a reader to un-limitedly accept reading of cards and codes.
(3) VALIDATION
Press key once. Two-beep confirms the entry
a)
b)
c)
a)
b)
c)
PROGRAMMING LOCATIONS FOR SYSTEM EXPANSION
Location 92, 93 and 94 are designed for setting desired modes for Wiegand data
output and Split-decoded operation. No setting change is required in these locations
for standard application.