P:\ INST INSTRUCTIONS\ACCESS CONTROLS\INST-918W Rev A 11-21 Page 1
918W
EntryCheck
TM
Features
12 key illuminated 3x4 digital keypad with configurable
illumination: always on, timed, off
Suitable for Indoor use
Standard 26-bit Wiegand output for universal
compatibility
Programmable Site Code
Programmable Keypad Operation
Single-gang mount
Two LED status indicators
Audible annunciation of keystrokes with adjustable
sound level: normal, low, off
Tamper-resistant screws
Moisture-resistant keys
Includes wiring harness
Operating Voltage: 5 - 16 Volts DC
Current Consumption: 25mA (typical), 40 mA (max)
Operating Temperature: -10° to 130°F (-23° to 54°C)
Humidity: 5% to 95% non-condensing
Dimensions (H x W x D): 4.75" x 3" x 1",
(0.25" wall projection)
Faceplate: Vandal-resistant S.S., 2mm Thick
Cabling: 6" wiring harness
Keypad Output: 26-bit Wiegand
Max. Cable Distance to Host: 328ft (100m) @12VDC,
100ft (30m) @ 5VDC, using 18AWG cabling
Recommended Cable (shielded, multi-conductor) or
equal:
-Belden 5504FE (6 Cond)
Specifications
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email [email protected]
The
EntryCheck
™ 918W Wiegand indoor digital keypad is designed to interface with most Access Control Systems.
The moisture-resistant keypad provides a standard 26-bit Wiegand output.
The backlit keys are bright and easy-to-read. The 918W keypad is mounted on a rugged, stainless steel faceplate and is
designed to be mounted in a standard single-gang electrical box.
Two long lasting solid state LED indicators show the status of the system. The left bi-color indicator lights red to indicate
power, or green to indicate an authorized access (controlled externally by host). The right indicator flashes yellow to
indicate that the keypad is in programming mode.
SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail: [email protected] ■ 801 Avenida Acaso, Camarillo, CA 93012 ■ PO Box 3670, Camarillo, CA 93011
INSTALLATION INSTRUCTIONS